Welcome to Tunable Inductions LLC the "Original" Mustang Cold Air Intake System for most 89 to Present Mustangs. Under New Ownership and Location, Formerly De Molet Automotive.
 
Contact Us info@tunableinduction.com

2005-2009 Supercharged Mustang GT 4.6L SOHC 3v
 95 MAF - 100mm Pipe Intake System
NOTE: MAGNACHARGERs Using Stock MAF Sensor with our intake will MAX Voltage at 11lbs Boost - HPX or SCT Meter RECOMMENDED for Higher Boost Levels. Magnacharger INTAKE Used in there base Kit will MAX voltage at 7-8lbs boost.
Now Standard With Direct Connect PCV Hose

Our 2005 to 2010 Ford Mustang GT 4.6L 3v V8 Cold Air Intake kits have Larger MAF Housings, Our Greenfilters Have Been Proven To Flow More Than Other Filters On The Market, And We Make MORE Horsepower than Our Competition - Independently Dyno Proven! We've Seen 38+rwhp even as much as 50+rwhp on bones stock Mustangs with just the addition of our Intake and 93oct Custom Dyno Tuning.  Get the Best "True" Cold Air Intake On the Market Money Can Buy!

Don't be fooled by the Competitions Billet MAF, Our Intake is ABS, Including our CNC's MAF Housing, Hands Down Cooler Air Makes More Power!

It's a simple law of physics that metal conducts heat and a plastic meter provides insulation and remains cool. We go one step further with a high heat high gloss black paint coating on the meter.

System #11SC-B    2005-2009 Ford Mustang GT S/C Magnacharger 4.6L 95mm System (Black)
95/100mm Shielded Intake Kit Includes:
 (1) Piece CNC'd MAF Tube 1/4" ABS Pipes (REQUIRES CUSTOM TUNING)
(1) Polycarbonate Gloss Black Shield With Bracket
(1) Custom Rubber Elbow & Clamps
(1) Tunable Induction Decal
(1) #2893 Green Filter ($131 Retail Value)
Directions & All Necessary Hardware Included

NOTE: Using Stock MAF Sensor with our intake will MAX Voltage at 11lbs Boost - HPX or SCT Meter RECOMMENDED for Higher Boost Levels. Magnacharger INTAKE used in there Kit will MAX voltage at 7-8lbs boost.

System # 11SC-C   2005-2009 Ford Mustang GT S/C Magnacharger 4.6L 95mm System (Painted)
Same as System #11SC-B with Custom Paint

NOTE: Unlike our competitors our entire intake including MAF housing and shield are painted.

TOP^

1. The ABS plastic construction of our systems offer the best insulated and coldest intake charge possible.

2. The System's all ABS construction isolates the intake charge from the vehicle metal.

3.  Unlike the metal intakes, you can put your hand on the System after the motor has gotten hot. ABS Plastic does not absorb or retain as much heat as the metal intake system. 

4.  Our System will never condensate or corrode

7.  All of our base systems are now painted two-stage gloss black. This is the Ford factory paint professionally applied using PPG paints. 

8. Now using "Green Filters" washable filters. Extensive independent testing has shown as much as 10% more airflow than our competitors cheaper knock offs.

9. Our National Product Rating is 4-3/4 stars out of 5, and our product warranty claims index is only .04. That's less than 0.1 of a percent.

10. Tunable Induction Kits have a Limited Lifetime Warranty.

Please direct all tech questions to our hotline: 843-208-FLOW (3569)

For custom or phone-in orders use:
 843-208-FLOW (3569)

For email inquiries email us directly at info@tunableinduction.com