Our New Full Polycarbonate Shields
Due to the HUGE success and popularity of our 05 - 08 systems, We are now offering underhood setups for our older systems including the full polycarbonate shield.
The shield not only supports the system but also repels heat up to 240 degrees. This setup will by far be (and stay) the coolest on the market!
89 - 93 5.0 Mustang
UUH: System #1 (non-metered)
Note: System will accept C & L, Pro-M, PMAS, & Granatelli meters
System Specs:
- Fully Polycarbonate heat shield (Provides full system support and repels heat to 240 degrees)
- Custom molded 9" Green Dual Cone filter (Same filter from our extremely popular 05 - 08 Stealth and Signature systems)
- 87 mm (ID) Throttle body pipe (spacer provided for different size throttle bodies)
Only $160 delivered (Add $30 for custom painted shield)
UUH: System #1S (5.0 Stroker metered system)
System Specs:
- Custom molded 9" Green Dual Cone filter (Same filter from our extremely popular 05 - 08 Stealth and Signature systems)Pro Mass Air System 85 mm meterFull Polycarbonate heat shield (Provides full system support and repels heat to 240 degrees)
- 87 mm (ID) Throttle body pipe (spacer provided for different size throttle bodies)
Only $340 delivered (Add $30 for custom painted shield)
96 - 04 GT 4.6L Mustang
UUH: System #2
Note: System will accept C & L, Pro-M, PMAS, & Granatelli meters
System Specs:
- Fully Polycarbonate heat shield (Provides full system support and repels heat to 240 degrees)
- Custom molded 9" Green Dual Cone filter (Same filter from our extremely popular 05 - 08 Stealth and Signature systems)
- 96 - 04 GT Throttle Body pipe
- Meter Adapter Included for factory meter (Notify if adapter is not required on C & L, Pro-M, PMAS, or Granatelli meters)
Only $185 delivered (Add $40 for custom painted shield & throttle body pipe)
UUH: System #2M
System Specs:
- Fully Polycarbonate heat shield (Provides full system support and repels heat to 240 degrees)
- Custom molded 9" Green Dual Cone filter (Same filter from our extremely popular 05 - 08 Stealth and Signature systems)
- 96 - 04 GT Throttle Body pipe
- 85 mm Pro Mass Air Systems meter
Only $379 delivered (Add $40 for custom painted shield & throttle body pipe)
99 - 01 Cobra Mustang
UUH: System #3
Note: System will accept C & L, Pro-M, PMAS, & Granatelli meters
System Specs:
- Fully Polycarbonate heat shield (Provides full system support and repels heat to 240 degrees)
- Custom molded 9" Green Dual Cone filter (Same filter from our extremely popular 05 - 08 Stealth and Signature systems)
- 99 - 01 Cobra Throttle Body pipe
- Meter Adapter Included for factory meter (Notify if adapter is not required on C & L, Pro-M, PMAS, or Granatelli meters)
Only $185 delivered (Add $40 for custom painted shield & throttle body pipe)
UUH: System #3M
System Specs:
- Fully Polycarbonate heat shield (Provides full system support and repels heat to 240 degrees)
- Custom molded 9" Green Dual Cone filter (Same filter from our extremely popular 05 - 08 Stealth and Signature systems)
- 99 - 01 Cobra Throttle Body pipe
- 85 mm Pro Mass Air Systems meter
Only $379 delivered (Add $40 for custom painted shield & throttle body pipe)
Professional Products
Polished - $599.00
The new Typhoon intake system for the 4.6L Ford Mustang is a really sensational manifold. Developed in conjunction with one of the leading Mustang specialists, this manifold has been chassis dyno proven to produce 21.5 more rear wheel hp than a stock manifold at 6,500 rpm. More torque from 4,000 rpm on up. This manifold features a three piece design that allows easy access to the bottom and the middle of the plenum chamber along with the runners for those who want to do their own additional port and plenum fine tuning. The manifold is a bolt-in replacement for all 1999 to 2004 engines and uses the stock alternator and all other stock engine accessories. Can be used on 1996-'98 engines if 1999 or later heads are used.
The Professional Products Power+Plus TYPHOON Manifold for injected Mustangs is a breakthrough in styling and performance. Available in satin or a highly polished show finish at a price that is hard to believe, this manifold is suitable for high performance street use, bracket racing, nitrous, or supercharged applications. Use the Professional Products 70mm Throttle Body for optimum performance.
- 75mm Plenum / Throttle Body combo Satin Finish - $285.00
- 75mm Plenum / Throttle Body combo Polished Finish - $315.00
When adding to UUH: System #2 (w/ factory or customer meter):
- 75mm Plenum / Throttle Body combo Satin Finish - $460.00
- 75mm Plenum / Throttle Body combo Polished Finish - $490.00
When adding to UUH: System #2M (w/ 85 mm Pro Mass Air meter):
- 75mm Plenum / Throttle Body combo Satin Finish - $664.00
- 75mm Plenum / Throttle Body combo Polished Finish - $694.00
Other New Products
