Info - Demolet.com

The First and Only Customer Tunable Mustang Cold Air Induction Systems!

None of the systems will trip a "Check Engine" light.

GO WITH THE ORIGINATOR OF THE 100 MM (4") PLASTIC INDUCTION SYSTEM

OUR 100 MM 4.6 SYSTEM HAS WON EVERY SHOOTOUT IT'S BEEN ENTERED IN ON STOCK APPLICATIONS (96-04). WE'VE NEVER HAD A SHOOTOUT SYSTEM RETURNED SINCE IT'S BEEN RETAINED ON THE SHOOTOUT SUBJECT MUSTANG.
THE 100 MM SYTEM HAS WON MULTIPLE SHOOTOUTS IN THE 2-BEND TUNING CONFIGURATION WHICH HAS BEEN EXTENSIVELY FLOW-BENCH TESTED AND ELICITS LITTLE TO NO SWIRL AND NO ADVERSE METER CALIBRATION OR AIR FUEL AFFECTS. THIS ALSO ENABLES LOCATING THE FILTER BELOW THE ENGINE HEAT FOR MUCH IMPROVED THROTTLE RESPONSE!
ADDING LENGTH IN FRONT OF THE METER (96-04 SYSTEMS) ADDS BIG TORQUE GAINS!! THE RESULTS OF THE UTI SHOOTOUT CONFIRM THESE TORQUE GAINS. THE JLT SYSTEM WE COMPETED AGAINST SHOWED A TORQUE INCREASE OF .28 FT. LB. OUR 100 MM SYSTEM POSTED BIG TORQUE INCREASES OF 12.3 FT LBS. OUR SYSTEM ALSO POSTED 5.75 HP GAINS OVER THE JLT SYSTEM (96-04 Systems).
UNLIKE SOME MANUFACTURERS WE ONLY ADVERTISE THE PERFORMANCE GAINS THROUGH INDEPENDENT DYNO SESSIONS AND SHOOTOUT RESULTS. THIS RESULTS IN OBJECTIVE NON-MANUFACTURER CONTROLLED PERFORMANCE RESULTS.
IF YOU'RE LOOKING FOR BIG HP & TORQUE GAINS YOU'VE FOUND THEM!!! IF YOU'RE LOOKING FOR A COSMETIC ADDITION ALONG WITH THE PERFORMANCE THEN CHECK OUT OUR CUSTOM FACTORY 2-STAGE PAINTED. SYSTEMS

All of our systems, including the base gloss black, are painted by a two-stage process with Ford factory paints. The two-stage gloss black comes with all of our systems, please call for prices on other Ford factory colors.

All 96-01 Cobras,
96-04 GTs,
01 Bullitts,
and
03 Mach 1s

The complete #4 meter forward system for only $129

The complete #4 system with the Professional Mass Air Systems MAF meter for only $310
(Meter alone retails over $200)
Delivery included!
Call: 1-910-670-5039

Full Length 4.6 Systems	Newly Updated Full Length 5.0 Systems

Our 5.0 Magazine '03 Cobra Shootout winning system typifies the unbeatable value and performance you'll attain. All of our 4.6 Systems are based on this 100mm award winning package. SPECIAL PRICING: $379 Delivered in Carbon Fiber for all 85/95 Full Length Metered Systems!	Joffre La Fontaine (national NMRA 2000 & 2001 FS class winner) recorded solid .1 gains with our least expensive meter forward 5.0 system and our new Full-Length 5.0 System will post higher gains.
	Read how our new revised 5.0 system is doing. "Duvernois picks up .15 reduction in the 8th ..." Click here to see Duvernois' story and details
	Pierre Duvernois' 1991 Mustang GT
99-04 Full 3.8 System

96/98 Cobra / Bullitt

5.0 Magazine called our system an "ANIMAL" on the '03 Cobra!	Our 3.8 systems are posting dyno and track gains of .3 - .4 and 12-15 hp, the highest recorded repeatable independent dyno gains ever attained on the V6s!
Don't be fooled by SHOW over GO!	Don't be fooled by the "ONE SIZE FITS ALL" philosophy
All of our systems are thoroughly tested and tuned with the correct and diameters for each application. We take this one step further with our systems being the only customer tunable intakes enabling further dial-in to your individual motor characteristics.	We're very proud to announce that our new Professional Mass Air Systems METERED SYSTEMS are posting very high (i.e. +15-17 rwhp in independently dyno verified) increases on the 4.6 metered system at a cost/performance ratio that RULES!
Our systems don't conduct heat like metal intakes, and will never condensate or corrode!	Our National Product Rating is 4-3/4 stars out of 5, and our product warranty claims index is only .04. That's less than 0.1 of a percent.

New Tunable Induction / Professional Mass Air Systems MAF Tuner combos
Professional Mass Air Systems has professionally flowed all our systems with great results. Due to the different injector sizes and computer curves please call the shop number 910-670-5039 to order these systems.

99/01 Cobra with Professional Mass Air Systems 85 meter ($379.00 delivered, with carbon fiber upgrade)

GT Throttle Body Pipe for use with strut tower braces ($79.00 delivered)
	Full length system shown, TB pipe individually $79.00 delivered
99/01 Cobra Throttle Body Pipe for all aftermarket throttle bodies including single blade throttle bodies ($79.00 delivered)

Our '05' Special Pricing include adding the Carbon Fiber Upgrade at $15.00 with any system.

WE NOW HAVE THE 'PROFESSIONAL MASS AIR SYSTEMS' METERS!!!

INTRODUCING OUR 89-93 5.0 STROKER METERED SYSTEM.
Includes: 100mm custom system/ 85 mm Professional Mass Air meter/ Green Filter/ Pigtail meter adapter for factory meter clip.
Only $ 389. (add $30. for factory paint)

John,
       I was having idling problems on my 347 mustang which is
       modified heads, cams, etc. etc. after putting on your mass-air
       system with the 85mm meter my idling problems are gone!
       my car runs very smooth. I also increased HP Torque and fuel
       economy and it was a pleasure doing business with you.

                                            Thank You
                                            ROBERT A. WAMBOLDT

With thousands and thousands of satisfied customers world wide we'd like to thank our fellow enthusiasts for their support!

Our systems are popular because they perform and offer a great cost/performance ratio!

The "tunabilty" of the system is unique to cold air induction systems. Enabling two distinct filter positions/system lengths allows much closer dial-in to individual motor characteristics.

Our systems are custom tailored for each engine application. Thorough testing of different filters and system diameters has resulted in the optimum combination for each motor. Our systems are professionally used and endorsed!

Our systems work great with the factory MAF meters and don't adversely affect meter calibration. They will also accept many aftermarket meters and throttle bodies without modification.

The ABS plastic construction of our systems offer the best insulated and coldest intake charge possible.

Please direct all tech questions to our tech hotline: 910-944-3663

For site orders use our convenient ordering and specification pages.

For call-in orders use our toll free line: 910-670-5039

For email inquiries email us directly at tunableinduction@yahoo.com

Tunable Induction Performance The System's all ABS construction isolates the intake charge from the vehicle metal.

Unlike the metal intakes, you can put your hand on the System after the motor has gotten hot.

ABS Plastic does not absorb or retain as much heat as the metal intake system. Our System will never condensate or corrode. The filter location at the bottom of the fender results in the coolest intake charge without the bugs and moisture associated with the ram air type system.

Average System Installation Times:
40 min. -- 5.0
1.5 hrs. -- V6
1 hr. -- 4.6, 2V, 4V Cleaning the filter involves only removing the cover plate and filter hose clamp.

Tunable Induction Systems available for 87- 88 speed density 5.0,
89-93 M.A.F. 5.0 Mustangs, 94-04 V6 Mustangs, 96-04 4.6 V8 2V GT / Bullitts
as well as all 4V Mustang Cobras. Tunable Induction Kits have a Limited Lifetime Warranty.

AVERAGE DYNO & TRACK GAINS Add .1 & +5-7hp for Professional Mass Air Systems metered systems.

3.8 V6 with filter:
+ 9-11 rwhp,+ 8-13 ft. lb. torque (meter forward)
+10-12 rwhp, +10-15 lb. torque (full system)

5.0 V8 with filter:
+ 6-10 rwhp, +10-13 ft. lb. torque (full system)

4.6 2V with filter:
+8-10 rwhp, + 6-10 ft. lb. torque (meter forward)
+11-13 rwhp, + 9-15 Ft. lb. torque (full system)

4.6 4V NON SC:
+8-10 rwhp,+ 6-10 ft. lb. torque (meter forward)
+11-13 rwhp,+ 12-15 ft. lb. torque (full system)

'03 SC Cobra:
+22-25 rwhp, + 13-15 ft.lb. torque (meter forward)

05 - 08 GT:
+21-28 rwhp, + 19-26 rwtq

05 - 08 V6:
+20-25 rwhp, + 15-20 rwtq

TRACK TIMES: ( times are reductions in Track Times)
3.8 +.15
5.0 +.10
4.6 2V +.15
4.6 4V +.10 - +.20
4.6 3V +.2 - +.3
4.0 V6 +.2